Endcap
Equal Elbow 90°
Equal Stop Tap Piece
Equal Tee Piece
Foot Clamp Jaws
Machined out of solid rolled steel our jaws are interchangeable with other UDR style footclamps (or KL style). The sizes available are: BQ (Ø55.6), NQ (Ø69.9), HQ (Ø88.9) & PQ (Ø114.3). These we keep in stock most times, the PWT (Ø139.7) is also available but not usually stocked. Jaws are fitted with replaceable hardened tool steel teeth.
M8x60 Flush Head Anchor Bolts
This is a M8x60mm flush head anchor (Dynabolt) that you can use to secure the 4 hole post base. The benefits of this bolt is you can drill through the post base and tap the bolt in without taking the post base away, unlike the traditional dynabolt.
As well, I have got the bolt itself with a black oxide finish and the washer has been black nickel plated. Nothing worse than having a nice sleek post base sticking out like a sore thumb because you had to use rainbow coated or galvanised bolts. These bolts will blend right in, please see one of the pictures to see how it looks.
You can of course buy the bolts by themselves for your own project but make sure the hole you are going through is a minimum of Ø11mm.
Reducing Tee Piece
Self Drilling & Tapping Screws (Tek) 12-14 x 20 mm
These screws are design to be used on either aluminium or steel tubular fencing (ie. pool fencing). They are not the cheaper soft version but a case hardened one which I have tried out on 6mm steel and was able to use the same screw multiple times. Also, if you need it, we also sell a 8mm hex drive suited to these screws that you can fit into your drill to make life a little easier for yourself.
Single Point 50mm Post Base
This is a small part designed for securing a post that the builder wants to have either directly on 2 corners or simply wants to have a very streamlined view where it looks like the post goes straight into the ground. Alternatively the part can also be used on a wall to hold a railing in place.
This part can also handle posts with a nominal wall thickness of 1.8mm and the mounting hole is suited to our M8 flush head dynabolts.